EMIDIO SAMBO 2025 JEWELLERY PRACTICE 2

  during this project i manufactured 2 strips of metal 22mm long and 3,8mm width to make tubes using the cone punching blog. I marked out my claws taking note the solder seam and positioning one of the hexagon punches into my solder seam. marked my lines and saw then used a straight Frazer to open up my lines, used my Berret file to create a nice v shape and making my lines straight. i marked my bottom claws in between the spaces and scrabbed 1.5mm from the bottom and used my triangular files to open the bottom part and create a MC Donald's logo ,I sawed the lines in-between the M shapes to give an antique look, I created an Oring using 1.2mm square wire in relation to the measured bottom of my setting then added a bar using the same wire across the bottom ,i drilled 0.9mm hole in the middle point of the bar ,I soldered my thin wire from the bottom avoiding excess wire.  I melted my remaining metal used a rolling machine to roll my metal up to 2mm ,used my 925 stamp to stamp...

  during this project i manufactured 2 strips of metal 22mm long and 3,8mm width to make tubes using the cone punching blog. I marked out my claws taking note the solder seam and positioning one of the hexagon punches into my solder seam. marked my lines and saw then used a straight Frazer to open up my lines, used my Berret file to create a nice v shape and making my lines straight. i marked my bottom claws in between the spaces and scrabbed 1.5mm from the bottom and used my triangular files to open the bottom part and create a MC Donald's logo ,I sawed the lines in-between the M shapes to give an antique look, I created an Oring using 1.2mm square wire in relation to the measured bottom of my setting then added a bar using the same wire across the bottom ,i drilled 0.9mm hole in the middle point of the bar ,I soldered my thin wire from the bottom avoiding excess wire ,I used sandpaper and polished my piece